MK DOG from levitsky
For making a cake in the form of a dog weighing 2.5-3 kg. you'll need:
1 liter of confectionery cream;
1 vanilla biscuit measuring 21x30 cm (A4 format) and 6-7 cm high;
1 chocolate biscuit size 21x30 cm (A4 format) and height 6-7 cm;
1 can of boiled condensed milk;
2-3 tablespoons of starch;
2-3 tablespoons of powdered sugar;
1 can (450 ml) of any canned fruit.
After your biscuits are ready, they should “lie down” under a towel for at least a day. Each of them must be cut across to make 4 cakes. Half the cream should be whipped with powdered sugar and half the norm of starch. This is the cream for the filling of the cake. Gently mix the second half of the cream with 2/3 cans of condensed milk and the remaining starch and also beat until stable peaks. It will be a cream for "wool". For the first layer, the biscuit must be cut according to pattern 1.
The first layer of the biscuit must be soaked with fruit juice, put the fruits cut into thin slices on it:
In this pattern, there is already another hind foot, which should lie on the lower hind foot. We impregnate the cake with a biscuit, put the fruit, then the cream.
From the vanilla cake we cut out a figure in 3 patterns. The basis for the formation of the dog is ready:
Next, I cut out 2 circles from the remaining biscuit, one with a diameter of the dog's head, and the other - smaller, for the back of the dog. Naturally, I impregnate the biscuit under these details, put fruits and cream. For the ears of the dog, I cut out a rectangle, such that when I put it on the head, the ends of the rectangle hang down. I make the middle part of the rectangle thinner so that the head is not too big, and I round the edges of the rectangle:
If necessary, at this stage I correct the shape - I cut off the excess, if somewhere the shape seems too flat - I put pieces of biscuit soaked in syrup. Obmaz
Find out how to make a dinosaur out of paper, plasticine. And for a celebration, you can bake a cake in the shape of a lizard or create a mastic decoration and decorate pastries with it.
The content of the article:
Children tend to show interest in the unknown. They love stories about animals that you won't even see in the zoo anymore. Some kids want to know how to make a paper dinosaur so they can make it. If you bake a birthday cake in the form of this animal or decorate a dessert with it, then the child and his little guests will be indescribably delighted.
Cake decoration made of mastic in the form of a giant reptile
Read how to make a fondant dinosaur and craft a delicious cake with this character.
If the child is a teenager, then he will like such reptiles. For kids, it is better to fashion more friendly ones. And the data is made from mastic. 3 cakes were baked for the provided cake biscuit cake. The lower one is in a wide low form. The other two are in forms of smaller diameter, but tall. After that, each of the upper cakes is cut horizontally into 3 parts, which are smeared with cream.
Then all the floors of the cake are covered with mastic of a certain color. After that, dinosaurs are glued using:
- squirrel;
- water;
- or food coloring.
To blind them, cut a strip from a thin layer, decorate the cloves in the center with a knife. Divide the workpiece in half - you have the teeth for the upper and lower jaws of the animal. For his body, you need to drop a little green food paint on a lump of mastic, knead it, roll it out and cut out the figure of the beast according to the template. Below are two. Choose any and use as it.
If you don't have food coloring, use carrot juice instead of orange. Green will replace spinach, and red will replace cranberry.
Homemade mastic should dry out for a day or even two in the air, after which the cake can be used for its intended purpose.
Mastic dragon - 3 examples of sweet creativity
A child may well make a reptile with his mother. Dinosaurs from plasticine are molded in the same way as from mastic. It will be interesting for children to create these animals from the sweet mass, because then it is so nice to eat the result of their work.
Here the dinosaur is blue, but you can use any other. Let the child first roll up 2 circles - one smaller, the second larger. Now they need to be connected by placing a small one on a large one to get the body of the beast. Mark with a knife or a thin stick the upper part of his hind legs and stick down the triangular foot and also 2 up, attach the tail.
Further, an oval is molded for the head, the nostrils, the nose of the reptile are indicated with a wooden stick. From small three-dimensional triangles, you need to make "spikes" from the head to the tip of the tail. Now you need to dry such figurines on the cake well when room temperature so that they do not subsequently "float", and you can decorate pastries.
See how to make a dinosaur cake. It may be a dessert dedicated to a fairy-tale character, so similar to this one. Read how to make a dragon, which you can and should then eat.
It was baked for him biscuit dough, but oil cream made from following products, used:
- 1 egg;
- 250 g butter;
- 200 g of sugar;
- 150 ml of milk;
- 1 sachet of vanilla sugar.
Cream must be applied to the first layer, covered with exactly the same biscuit, which is smeared with jam. From above we lay the third cake in the form of a dinosaur. We generously lubricate it with oil cream.
If you prefer chocolate, then when cooking the cream, add instant cocoa to it. If you use the usual one, in this case, first stir it with warm milk, then pour it into the boiling mass.
Put a piece of biscuit on the back and head of the character.
Do not throw away the cuttings. Grind them, mix with cream. Spreading this mass on the base of the cake, mold a dinosaur out of it completely.
Now cover the figure, with the exception of the head, with a layer of green mastic. Cover with cling film, refrigerate overnight.
Take it out in the morning home cake, cover the head of the animal with mastic, decorate it as your fantasy tells you.
Now you know how to make a dragon so that it turns into a cake. If you want to mold a dinosaur from mastic, see a simple example.
This cake will take everyone who contemplates it many millennia back. Create a corner of the nature of that time. Here's how to decorate a cake at home so that it looks like it was baked by a famous pastry chef.
For him, take:
- mastic;
- food paints;
- molds;
- silicone rolling pin;
- marzipan mass.
Now you need to roll out another layer, coloring it green. Cut the edges in a zigzag pattern, make a deepening in the center, slightly to the side, for the lake, using a pastry iron or the back of a knife.
Now, from brown mastic, here's how to make a dinosaur: sculpt its body with a tail, then attach the paws, make small details. Create flowers from mastic, and add texture to the leaves using molds.
Write with mastic to whom the cake is addressed and, after drying, hand it to the birthday man.
Now that you know how to make a fondant dinosaur, you can explain to your child how to make one with other materials as well. The manufacturing principles are very similar.
How to make a plasticine dinosaur?
The figure shows what parts a large and small animal consists of. We sculpt the body in the form of an oval. The tail looks like a long cucumber, the tip of which needs to be pointed. For the head, a piece of plasticine must first be rolled into a “sausage”, then bent on one side so that the head is indicated on the neck.
For the legs of the lizard, let the child knead the plasticine, roll 4 ovals out of it - 2 a little more - these are the front legs, and the other two will be slightly smaller than these - these are the back ones. Claws for one paw are made from three small lumps of plasticine.
It remains to collect all the details and finish the informative lesson. If you don't want to finish it, then read how to make a dragon to look like a cartoon character. It can be molded not only from plasticine, but also from polymer clay, from mastic.
This master class has prepared already numbered photos for you. Looking at them, you will be able to complete all the steps in the given order and make a plasticine dinosaur.
Here's what you need to bring with you for this needlework:
- plasticine blue or other color;
- small balls - 2-3 pieces;
- plastic knife;
- toothpicks;
- hook;
- beads.
If you do not have a blue plastic mass, use any other plasticine, taking the material of your favorite color.
Roll out the plasticine in the form of a pancake, put a ball inside. Close the hole. Blind the nose in front of this blank.
Also, using the second ball, make the body of a charming dragon. Then fashion his paws. To make them flat at the top, flatten this part with your hand or with a small ball. Mark the fingers with a knife.
Use it to make a couple of folds on the back. Attach the hind legs, tail.
Let's take care of the head of the animal. Using a hook, mark his mouth and nostrils. Make indentations for the eyes by clicking here with a bead. The eyes consist of protein - these are 2 larger balls and a pupil - a smaller circle.
For the upper eyelids, thinly roll out the plasticine of the desired color, give it a triangular shape, round the lower corner. Stick the eyes in place. This can be done using pieces of a toothpick and a small button on the leg, securing the eye sockets on it.
The stages of manufacturing the front paws are given in the following figures.
Attach them and start making wings. For each, a three-dimensional triangle is molded, then you need to draw veins, as in the photo. Wrap 2 beads with pieces of plasticine, attach to the wings, and the other side to the back.
This is how plasticine dinosaurs are made. If you want to make them differently, check out the following cool ideas.
Create a dinosaur out of cardboard and paper
Origami is a very interesting type of needlework. By folding the paper in a certain way, you will get a lizard. How to make such a dinosaur using origami paper patterns for beginners will help them not to get confused. Explanations will also make things easier.
For origami, take thick paper. It should be two-sided, that is, from the face and the inside it should be painted in any color.
Fold it diagonally first. Then bend 2 corners as it is done in the second picture. In this case, the faces will be on a diagonal line. How further is done according to the principle of origami dinosaur, the photo shows. You can also watch videos from step by step manufacturing reptiles at the end of the article.
If you would like to stay for more easy option, see the following. This pangolin was made of thick paper - cardboard.
Draw the contours of the body, legs, spines of the future dinosaur on cardboard, cut it out.
Make 2 incisions on the abdomen, insert a pair of legs into each. Then make a few small cuts on the back for spikes, which must also be installed on the body.
carnival lizard masks
Speaking about how to make a dinosaur, it is worth noting that you can turn any person into it for a while, and also use unexpected materials to create a lizard. See how interestingly a plastic canister was carved to become a dragon's head.
Only 3 items helped to create it, these are:
- canister;
- felt-tip pen;
If you do not know how to make a dinosaur, but you need to make a mask of this animal, take:
- cardboard;
- scissors;
- white double-sided tape;
- newspapers;
- PVA glue;
- white cardboard;
- paints.
Now measure the head of the person for whom you are making a mask with your own hands, cut another strip of cardboard along its diameter, glue its ends to each other. Determine the area of \u200b\u200bthe head from the hairline to the back of the head, cut a strip of this size, glue it in place. With the help of PVA, 2 horizontal fragments are attached to it, the upper edges of which must be glued to the top of the mask.
Let the glue dry, leaving the mask until the morning. The next day, attach many strips of tape to it, making out the eye sockets. Now you will make a papier-mâché dinosaur.
Remove the top protective film from the adhesive tape, stick newspaper on these strips. Take the second one, grease it with PVA. Glue to this one, then the next one, and so on, until the mask is thick enough. Now you need to let it dry thoroughly and only then paint it. Once it's dry, it's time to head to the costume ball to show off your creation.
In the meantime, the mask dries, we offer you to watch the promised video:
The following story will be useful for children, as it shows how to make a plasticine dinosaur:
two paper templates based on these images (click to enlarge). You can either print them out or transfer them to a sheet of paper by hand while looking at the picture on the screen. In any case, make sure the chart fits the size of a 23cm cake.
Bake two cakes with a diameter of 23 cm, let them cool completely. Take the cakes out of the baking dish.
- Self-made cakes will be denser and stronger than semi-finished products. This may take longer, but your cake will be neater and easier to decorate later.
- If you have time, freeze the cakes before assembling the dinosaur. This will make them less crumbly during creaming.
Cut out the body of the dinosaur. Determine the center of one cake. Cut the crust in half with a serrated bread knife. Lay the two halves together, with the cut edges attached, on the work surface as shown. This is the body of a dinosaur. Set him aside.
Cut out other parts of the body. Cut out paper templates and place them on top of the second cake (exactly as they were drawn, cut them only after laying them out correctly). Cut out the details from the cake.
- Before you start cutting the cake, lay out the pieces of paper on your torso segment to see how they look. If there are any cuts or adjustments you want to make, do so on paper before cutting your cake into pieces.
Collect dinosaur. Look at the photo on the right for help. Connect the two parts with white cream. Then attach other parts of the body. Set the head on the torso with a toothpick (pay attention to where it will be so that later it does not accidentally fall into someone's piece of cake). Trim the corners and square edges on the legs and shoulders as you like.
Spread a thin layer of green cream on top of the cake with a spatula. This is called crumb coating - and for good reason, because a lot of crumbs crumble and knead in the cream. Gently press the surface of the cake. This will be to your advantage, as the cake mix is quite crumbly and hard to work with.
Decorate the dinosaur with scales. Squeeze cream stars onto green icing, then blend in with blue stars for an accent.
Add mastic plates. Lay out the plates of mastic in the shape of a polygon on the back. If the fondant icing does not hold well, insert a toothpick into the plate, and then stick it into the cake.
- To prepare the plates, roll the mastic into cakes 3 mm thick. Cut off the fondant with a small knife to create polygonal plates for the dinosaur. Prick the plates with a toothpick to give them a ribbed texture. Make as many blanks as will fit on your dinosaur.
Chocolate cake "Dinosaur" will wonderfully decorate a nursery festive table and make your kids happy. My dear friend Irina shares her creation with us.
Dinosaur cake recipe
Ingredients (for 2 cakesD=23 and 25 cm):
- butter - 230 gr.
- eggs - 3 pcs.
- milk - 250 ml
- sugar - 350 ml
- cocoa - 3 tablespoons
- flour - 500 ml
- baking powder - 3 tsp
- vanilla sugar - 3 tsp
Cream Ingredients:
- Boiled condensed milk - 1 can
- Butter - 1 pack
For decoration:
- cereal stars
- marmalade
- colored dragee "Tick-tock"
- coke chips
Cooking:
Beat eggs with sugar until stiff.
Melt the butter, cool slightly and pour in the milk.
Mix flour, vanilla sugar, baking powder, cocoa and gradually add the resulting mixture to beaten eggs, then pour in the cooled butter and milk. Knead the dough thoroughly.
Lubricate baking dishes D = 23 and 25 cm with oil (it is advisable to put baking paper on the bottom), then pour the dough into them and bake at t = 175 gr. about 40 min. It is important to bake two cakes at once!
Check the readiness of our cakes with a toothpick or match.
Leave the finished cake in the mold for 10-15 minutes, and then carefully remove it from the mold and cool on a wire rack to room temperature.
We decorate the cake. First you need to cut a small cake in half and attach the halves to each other - this will be the body of our dinosaur.
A large cake must be cut according to the scheme and formed from all the details of a dinosaur:
Then you need to get the cake from the refrigerator and cover the entire surface with cream in an even layer.
And now you can start decorating our dinosaur.
This is so wonderful chocolate cake"Dinosaur" turned out at Ira.
Bon Appetit!
For viewing, I offer a video recipe for cooking baby Cake "Hedgehog"
Cake "Dinosaur" MK
Cake "Dinosaur" MK
We do it step by step.
The cake was made from biscuit (white and chocolate), cherry confiture, stabilized cream with almonds and prunes.
1. It is necessary to prepare cakes and cream in advance. Then cut the cakes horizontally into two parts. Swap the top of one with the other. Put on top of each other and approximately cut out the shape with a knife, not forgetting that when smearing with cream, the upper part will rise slightly.
2. Saturate with syrup, smear with confiture, and then with ready-made cream the lower part, lay out the prunes cut into pieces (it can be soaked in advance in orange juice), lightly press it into the cream.
3. Cover with top cakes and lightly, slightly press down. OOOOOOO very carefully! so that the cream does not climb in all directions! Everything! Nothing else to cut or level - only in the cold! At least 4 hours for the cream to completely harden. And we have time to prepare green mastic. It takes about 60-65 pieces to cover such a 3D cake (about 2.5 kg). marshmallows.
Time has passed, the cake has frozen, and now the fun begins!
3. Remove from the refrigerator and bring the shape to the desired size and volume. Collect all scraps in a bowl. To cover under the mastic, you can use butter-custard (mastic does not melt on it). Pieces, after trimming, mix in a bowl with a mixer with a small amount of cream, until a mushy consistency is obtained. To taste - this is a potato cake, which we loved so much in childhood)
Now carefully cover the sides, slightly rounding them and hiding the butter cream under the “putty”.
Carefully smooth everything smeared with a knife or spatula. You can lightly moisten the spatula with syrup or just boiled water.
Now grease the top with the same cream, preparing the surface for the mastic.
4. Divide the mastic into two unequal parts. For head and body. Roll out a larger one and carefully, on a rolling pin, transfer it to the “body” of the cub.
5. Immediately lightly smooth with your palms, tucking under the bottom.
6. Trim excess with a pizza wheel.
7. Roll out the second piece and cover the "head" of our dino.
Smooth again and trim.
8. Move the “head” closer to the “body”, remove starch residue with a soft brush. Remove all unnecessary: paper, scraps.
Now it remains only to make a mouth, eyes, nose, spots on the back and decorate.
